Changes for the new racks include:
-Completely redesigned mounting hardware to reduce the likelihood of loosening over time (You will need to still check hardware tightness regularly as with any rack)
-Two sets of extra long 350mm mounting struts, one straight and one offset to more easily fit a wider range of bikes
-Internal dynamo wiring port on the platform for a headlight or tail light
-Increased 12mm tube diameter of vertical leg with thinner walls to increase stiffness and reduce weight (load rating over the center of the platform remains 30lbs)
The T rack weights 470 grams without hardware, 649 grams including all mounting hardware, bolts and uncut 350mm struts. Total load limit for the T rack is 30lbs, including 5lbs for each set of triple bosses. The load on the rack platform must be centered over the rack, and not overhanging/cantilevered off the end of the platform.
You’ll need proper threaded load bearing mounting points at the dropouts and seatstays or fork crown in order to properly mount the T rack on your bike. If you don’t have upper rack bosses, there are seat clamps with integrated rack mounts available. If your steel fork doesn’t have upper bosses, we sell a rack adaptor that attaches to the center hole of your fork crown (depending on the style of your fork).
What others are saying
There are no contributions yet.